SPF Coating Systems-Spray Foam Insulation in Harris County, TX
SPF INSULATIONS
WE PROVIDE
EXCELLENT SPRAY FOAM INSULATION IN HARRIS COUNTY, TX, AND ITS SURROUNDING AREAS
Availing yourself of spray foam insulation is a service that you
should consider. Why? It’s because insulating your property is a must,
especially if you live in areas with warmer climates such as Harris County, TX.
And this specific type of insulation is extremely effective in regulating your
home’s temperature, as well as preventing moisture from entering it. While
there are many benefits of getting an SPF insulation, you must first understand
what it is.
What is SPF?
Now that you know what SPF insulations are, it’s time to discuss their
advantages. So, what are the benefits of opting for this kind of service for
your home in Harris County, TX?
1. High R-Value
R-value is the capability of an insulator to resist heat flow. This
means that the higher the R-value of a certain substance, the better it is at
insulating heat. With that in mind, the R-value of SPF is 6.3 per one inch of
thickness. In comparison, wool — the most common insulation material used —
only has a value of 3.5 per one inch of thickness. Now, that is a big
difference! This gives SPF a clear advantage in regulating your home’s
temperature.
2. Prevents Air and
Gas Infiltration
Infiltration happens when air finds its way into an establishment
through small cracks in the wall, which leads to a large amount of energy loss.
The reason being is that it takes more energy to heat up your home when cold
air is constantly flowing inside your house. But because of the way SPF is
applied, it can squeeze itself into nooks and crannies within the walls, making
it an excellent air sealant. Essentially, SPF helps in conserving energy.
3. Helps Reduce
Moisture and Molds
In addition to being a great air sealant, SPF can also keep out
moisture. This means that molds won’t grow as easily inside your home. Since
the foam is also water-resistant, mold will not be able to eat through it,
completely stopping fungi from entering your residence.
4. Enhances Overall
Building Stability
Spray Foam Services Harris County has high density and the ability to get
inside the hard-to-reach places in walls. This helps make the structure
sturdier and more durable. In addition to this, since the material is
water-resistant, it can also prevent water damage from occurring inside your
home.
5. SPF Pays for
Itself
Now, you see the versatility of SPF as an insulator. It can do more
than just regulate your home's temperature, as well as make it structurally
sound. The amount of energy you save by preventing air infiltration should be
reason enough for you to get this type of insulator. But it doesn't stop there.
SPF is one of the most durable insulators found on the market today. Its
longevity is essential if you are thinking about your budget. Why would you
spend less money on an insulator you will replace in only a year when you can
spend a few extra bucks on an investment that will last you over a decade?
As you can see, getting an SPF would only prove to be advantageous for
you and your home in the long run. And here at Eco foam Insulation and Roofing, we provide our clients with only
the best that the market has to offer: Foam-Lok. While it’s true that SPF
itself provides better insulation value and reduces air infiltration, Foam-Lok
offers a continuous air barrier for your property. Apart from that, it also has
its own benefits that give Foam-Lok an edge above the rest.
So, if you’re
looking for a company that can provide Spray Foam Insulation
Harris County for your home in Harris County, TX, don’t hesitate to give us a call
at 713-688-3757 or send us an
email. You can also leave us a message by filling out the form provided on our
Contact Us page.
What are you waiting for? Contact Ecofoam
Insulation and Roofing today!
COMMERCIAL USES
Architectural,
Design, and Engineering
The architectural, design, and engineering communities have utilized
the many benefits and unique characteristics of sprayed polyurethane foam (SPF)
for nearly half a century.
At face value, spray foam has traditionally been more expensive than
alternative materials, but then again so have Rolex watches and Mercedes-Benz
vehicles. You get what you pay for, and with spray foam, you get performance,
sustainability, and combined characteristics no other building products can
offer by themselves.
There is a reason why polyurethane foam is used in almost every
refrigerator, hot water heater, refreshment cooler, insulated flask, and hot
tub. You don’t see fiberglass batts wrapped around the space shuttle either.
That’s because polyurethane foam is far superior in its R-value,
structural strength, air/moisture sealing, and form-fitting characteristics.
Consumers and facility managers are becoming more educated and more
demanding relative to the building materials used in the construction of their
properties. They are seeking the best, highest performing, and sustainable
materials for their properties, their families, and their occupants, not to
mention their wallets. And even though spray foam is more expensive, it can absolutely
help to save money and create much greater value and performance over time.
That’s because spray foam is one of the best insulating materials
known to man. When SPF is specified in construction, it often results in
payback and savings on energy costs. SPF can often eliminate the need for other
materials, and labor-intensive tasks, and possesses characteristics that competing
materials just don’t have.
For example, Residential Insulation
Harris County such as fiberglass has nowhere near the
benefits of spray foam insulation. And while SPF may cost more upfront, it
pays for itself through energy savings, air quality improvements,
air/moisture/mold management, noise reduction, and overall strength improvements.
If you really look at these benefits, SPF is actually less expensive and far
more valuable over time, and isn’t that what sustainable design and “green”
building are all about?
In commercial roofing, for example, no other materials can provide all
the same advantages as spray foam by themselves. Energy savings alone can make
the difference between spray foam and other materials. Another unique
characteristic is that SPF is self-flashing and becomes a monolithic and
potentially leak-free roof surface.
High R-Value
Sprayed polyurethane foam has an aged R-value of approximately 6.0 per
1-inch thickness (depending on the particular formulation and application,
higher values have been achieved), enabling it to provide more thermal
resistance with less material than any other type of commercial insulation
material. SPF systems are frequently used to insulate and protect a wide
variety of residential, commercial, and industrial buildings.
Reduce Moisture and
Mold
Molds produce tiny spores to reproduce. Mold spores waft through the
indoor and outdoor air continually. When mold spores land on a damp spot
indoors, they may begin growing and digesting whatever they are growing on in
order to survive. There are molds that can grow on wood, paper, carpet, and
foods. When excessive moisture or water accumulates indoors, mold growth will
often occur, particularly if the moisture problem remains undiscovered or
unaddressed. There is no practical way to eliminate all mold and mold spores
in the indoor environment; the way to control indoor mold growth is to control
moisture.
Roof Spray Foam Montgomery County is really a must-have for people living
in Harris County and the rest of Texas. Call 713-688-3757 now to get in touch with Eco foam Insulation and Roofing: The number one provider of SPF
insulations in Harris County, TX.
Original Source: https://ecofoamtexas.wordpress.com/2022/08/15/spf-coating-systems-spray-foam-insulation-in-harris-county-tx/
Comments
Post a Comment